An innovative research project has been carried out on the company premises of STM Montage GmbH in Lunzenau, Germany: A wind power plant with a lattice tower, where the uppermost segment consists of fiber-reinforced molded timber pipes.
A tower called "Semiramis", consisting of five oversized wooden plant bowls, is being built in Zug, Switzerland. The structure, with an extraordinary design, will be built in the middle of the new innovation district called Tech Cluster Zug.
The goal of the hydroelectric power plant project was to analyze the resistance of a double mechanical displacement system on rails subjected to tensile stress.
Witteveen+Bos performed seismic analysis on an existing concrete foundation with piers, located in the Netherlands. The connected steel pipe rack and piping system were included in the analysis.
Utilizing a multimodal response spectrum analysis in RFEM, Witteveen+Bos specified unique response spectra to analyze the structural response induced by this seismic activity.
In the Chinese province of Qinghai, near the city of Haixi, a complex of 23 multi-energy plants is being built, combining different technologies to generate energy from renewable resources. The complex comprises a 618.4-foot-high tower of the 50 MW solar power plant; the support structure is expected to be completed in mid-2019.
The solar power plant uses modern CSP (Concentrated Solar Power) technology, which enables the storage of thermal solar energy, thus ensuring continuous power generation even at night.
Within a short period of time, a modern aluminum structure with sophisticated building services was constructed for the company Hydro Aluminium in Grevenbroich.
The construction project on the premises near Düsseldorf covers approximately a length of 722 ft and a width of 394 ft. It includes various connecting bridges to the existing premises, a three-aisle production hall with outbuildings, and a 328-foot-long and 99-foot-high high-rack warehouse, which was constructed in slipform paving technology.
A unique project called "Oxigeno" is currently under construction in San Francisco de Heredia, San José, Costa Rica. The recreational and commercial space, which measures almost 1,345,489 ft², offers the visitor a relaxing shopping atmosphere in harmony with nature. Among other things, 200 trees were planted on the site. The main food court is covered with a 17,222 ft² ETFE cushion as a roof, currently the biggest in the world.
SWE-Eurodrive GmbH & Co. KG, a German family-owned company operating in the area of drive technology, is expanding its plant at Graben-Neudorf until 2019. The existing plant, with a size of 1,184,030 ft², will be almost doubled. The main components of the extension are a factory building, a combined pedestrian and media bridge, and a road bridge.
A chipboard factory in Germany was renovated at the beginning of 2014. The main structural elements were made of S235 steel hot‑rolled shapes and the structure was set on a slab foundation.
The Kozłowski-Projekt Engineering Office participated in designing a factory which produces wood‑based, high-endurance laminate panels. The project by MLT OOO was constructed in Torzhok, Russia, making it Europe’s largest manufacturer of panels of this type.
A second mixing plant for ground building materials was built in 2015 on the site of Baumit GmbH in Landsberg/Lech. The total weight of the supporting steel construction amounts to about 661 tons.
The boiler supporting structure with a combustion chamber is used as the main stiffening element of the coal‑fired plant in Neyveli, Tamil Nadu, India.
The boiler supporting structure measures 100 ft x 100 ft x 406.8 ft and, together with the boiler roof arranged above, it has to withstand loads of about 50,706 t.
The continuous casting plant of the JSW ISPAT steelworks in India was extended by an additional level and completed by new plant components and stair towers. At the same time, the existing structure was reinforced to be able to absorb the additional weight of the new components as well as increased seismic loads.
Regular maintenance and repairs of an aircraft include performing aircraft engine testing. For the protection of the residents in nearby communities, Flughafen Zürich AG (FZAG) commissioned the planning of a noise protection hangar which goes beyond the legal requirements for noise protection.
Due to new technological demands, the investor Melamin d.d. Kočevje decided to replace the old steam boiler using fossil fuel (Đuro Đakovič, No. 5356) with a new one with total power of 9.8 MW.
A student team from the Czech Technical University (CTU) in Prague took third place overall in the Solar Decathlon 2013, an engineering competition which is organized biennially by the U.S. Department of Energy. The competition challenged 20 collegiate teams from around the world to design, build, and operate an energy-efficient solar-powered house.
In 2013, a very special project was carried out in Pitigala, Sri Lanka. A bridge was designed, calculated, and built by 30 students. They are part of the university group "Engineers Without Borders Karlsruhe Institute of Technology e.V.", which realizes development projects in seven different countries.
As the geothermal energy market is continuously increasing, BAUER Maschinen GmbH, a German company working in the field of specialist foundation engineering, has developed a new deep drilling rig. Dlubal Software's German customer Ing.-Büro H.-U. Möller was in charge of the plant's structural analysis. The system is used to make borings reaching to a depth of 22,965 ft in the area of geothermal energy, oil, or gas.
The designed object is a heat exchanger to which a chimney was set up, a construction with an overall height of 199.1 ft. The structure consists mainly of sheets that were reinforced by exterior steel cross-sections in the bottom area.
The South African energy provider Eskom is building one of the world's largest coal-fired power stations in Medupi, 248.5 mi north of Johannesburg; the station has 4800 MW of power.
One of the most modern power stations for energy production, based on renewable resources, can be found in Schwendi, Southern Germany. Following the design of Milan architect Matteo Thun, an architecturally sophisticated framework consisting of reinforced concrete, steel, and timber has been created.
A new boiler house has been built for the biomass power plant in Berlin-Neukölln, Germany.
The engineering office of Jürgen Ehlenz, a customer of Dlubal Software, was in charge of the structural analysis and design of the boiler house, including the connection design.
The tripper car bridge is a part of the conveyor belt structure realized in Uzbekistan.
The engineering office of Jürgen Ehlenz, a customer of Dlubal Software, was responsible for the structural analysis and detailed design of the conveyor bridge and other parts of the conveyor belt system.
The grate scaffolding of the biomass power plant in Berlin-Neukölln, Germany, is a structure with a high temperature load.
The engineering office of Jürgen Ehlenz from Beckingen, a long-time Dlubal customer, was responsible for the structural analysis of the grate scaffolding with moving parts, as well as for the construction and design of the piping.
The Eden Project in Cornwall, United Kingdom is a complex of two huge biome buildings consisting of several domes and outdoor gardens. Inside the biomes, there are several thousand species of plants collected from many diverse climates and environments, which serve for biological studies and exhibitions. The Rainforest Biome was built in the second phase of The Eden Project’s development. It is kept at a tropical temperature and moisture level and covers over 1,000 varieties of tropical plants.